ICP 4 Ton 14 SEER Packaged Gas Unit 208-230/1/60 48,000 BTU Input Heat
Easy Installation
Factory-assembled package is a compact, fully self-contained, combination gas heating/electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/ cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes two horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal Energy Efficiency Ratios) of 13.4, 10.6 EER2, and AFUE (Annual Fuel Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment.
Turbo-tubular™ heat exchangers are constructed of aluminized steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air. In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field-installed accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with a full refrigerant charge. Refrigerant service connections make checking operating pressures easier.
High Pressure Switch provides added reliability for the compressor.
Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from aluminum tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit.
Low sound ratings ensure a quiet indoor and outdoor environment with sound ratings as low as 70.7 dBA.
Easy to service cabinets provide easy 3-panel accessibility to serviceable components during maintenance and installation. Thebasepan with integrated drain pan provides easy ground level installation with mounting pad. A nesting feature ensures a positive basepan to roof curb seal when the unit is roof mounted. A convenient 3/4-in. (19.05
mm) wide perimeter flange makes frame mounting on a rooftop easy.
Standard horizontal metal duct covers with insulation come with the unit \and cover the horizontal duct openings. These can be left in place if the units are converted to downflow.
Integrated Gas Control (IGC) board provides safe and efficient control of heating and simplifies trouble-shooting through its built-in diagnostic function.
Cabinets are constructed of heavyduty, phosphated, zinc-coated prepainted steel capable of withstanding 500 hours in salt spray. Interior surfaces of the evaporator/heat exchanger compartment are insulated with cleanable semi-rigid insulation board, which keeps the conditioned air from being affected by the outdoor ambient temperature and provides improved indoor air quality. (Conforms to American Society of Heating, Refrigeration and Air Conditioning Engineers 62.2.) The sloped drain pan minimizes standing water in the drain. An external drain is provided.
Weight 467
AFUE 81
AHRI - Usage Packaged
Blower Motor HP 1 HP
Blower Motor RPM 1,075
Blower Motor Type ECM (Electronically Commutated Motor)
Brand EcoTemp™
BTU Input 90,000
BTU Output 74,000
CBU - Compressor Bearing Unit Yes
Condenser Motor HP 3/4 HP
Condenser Motor RPM 810
Condenser Motor Speeds 1 (Single)
Condenser Motor Type PSC (Permanent Split Capacitor)
Cooling Capacity 47,000
Cycle/Hertz 60 Hz
Drain Connection Size 3/4"
Drive Type Direct
Energy Star Rated No
Equipment Type Gas Electric
Fan Diameter 26
Fuel Type Natural Gas or LP
Gas Connection Size 1/2"
Ignition Type Direct Spark (DSI)
Number of Fan Blades 1
Phase Single
Product Family WPG4
Prop 65 Yes
Refrigerant R-410A
Sound Level (dBA) 75.4
Stage Single
Tonnage 4
UL Listed Yes
Voltage 208-230 VAC
Substantial Commodity Steel; Copper; Aluminum
Evaporator Coil Metering Device TXV/TEV - Thermostatic Expansion Valve
EER2 10.6
SEER2 13.4
Gas Connection Type NPT
Air Flow Direction Multi-Position
Drain Connection Quantity 1
Locked Rotor Amps (LRA) 130
Height 54.75
Length 44.125
Width 48.1875
Compressor Type Scroll
Return Air Filter Size (RA) 24" x 16" x 1
Blower Wheel Diameter 11"
Blower Wheel Width 10"